Seissiger solar panel for wildlife cameras

BrandSeissiger
€114.95

The SEISSIGER solar panel is an additional power source for wildlife cameras.

The solar panel has a built-in lithium-ion battery that is continuously charged by the solar cells when exposed to the sun. Once connected, the camera is powered by the solar panel's charged lithium battery for as long as possible and only switches to the internal batteries when the solar panel's battery charge is temporarily too low. As a result, the camera's batteries have a significantly longer service life.

Before using the solar panel for the first time, we recommend fully charging the built-in battery once at the socket using a USB-C charging cable (takes up to 12 hours).

UTONOMOUS, NEVER-ENDING POWER SUPPLY

  • integrated lithium-ion battery with 6,800mah
  • significantly extends the life of the camera batteries
  • protects the environment and your wallet
  • compatible with all 6V and 12V wildlife cameras that have a 4.0 x 1.7 mm hollow plug connection
  • Can be charged via USB-C
  • Robust, weatherproof camouflage housing, protection class IP67
  • Solar power first charges the built-in battery and then any connected battery packs
  • Easy to mount thanks to the included bracket

ABOUT THE SOLAR PANEL
The SEISSIGER solar panel is an additional power source for wildlife cameras.

The solar panel has a built-in lithium-ion battery that is continuously charged by the solar cells when exposed to the sun. Once connected, the camera is powered by the solar panel's charged lithium battery for as long as possible and only switches to the internal batteries when the solar panel's battery charge is temporarily too low. As a result, the camera's batteries have a significantly longer service life.

Before using the solar panel for the first time, we recommend fully charging the built-in battery once at the socket using a USB-C charging cable (takes up to 12 hours).

The solar panel can be used with 12V and 6V wildlife cameras.

You will receive two DC output cables, a 12V cable (left) and a 6V cable with voltage converter (right). SEISSIGER cameras use the lower voltage of 6V; many other wildlife cameras work with 12V and use the left DC cable. The cable length is 150cm.

To connect the solar panel to the camera, select the appropriate cable. There is a thread on one side of the cable below the plug. This side belongs in the solar panel. Open the left rubber cover and carefully screw the plug into the internal thread of the solar panel. Please ensure that you do not screw the cable in too tightly, otherwise you could damage the thread on the cable.
Finally, connect the camera socket of the Solar Panel to the input socket for the external power supply of your camera (see operating instructions for your camera model).

Technical specifications:

  • Current requirement: 5V min 500mA
  • USB charging voltage: 5V-9V
  • Discharge voltage: 12V
  • Max. Discharge current: 2A
  • Max. Charging voltage protection: 6V
  • Recommended charging time: 12 hours to fully charge
  • Charging priority: If both USB and solar charging sources are available, USB charging has a higher priority.
  • Operating temperature: -20 to 40°C
  • (storage temperature: -30 to 70°C)
  • Operating humidity: 5% - 90%

- Scope of delivery: SEISSIGER solar panel, ball head mount incl. dowels, connection cable for 12V wildlife cameras, connection -cable for 6V wildlife cameras, USB power supply unit with USB type-C cable
- Dimensions: 16 x 23 x 2.5cm
- Cable length: 150cm
- Weight: 650g

More Information
Accessories suitable / intended forTrail cameras, Custom-built camera trap systems
BrandSeissiger
Write Your Own Review
You're reviewing:Seissiger solar panel for wildlife cameras